EKEN.EXE:

EKEN.EXE will install device drivers and a program called AMCAP for viewing your live video in web cam mode. Install EKEN.EXE first. Then to put the camera into web cam mode you hold down the PIC/VIDEO button on camera as you plug in the USB.  A box should pop up saying "DRIVER SOFTWARE INSTALLATION" Note: Some say they could press and hold POWER button on camera but it didn't work for me, so try both ways if one way doesn't work. Once all the devices have been loaded you wont need to do this again, all you will need to do to start web cam mode is plug in USB and click the power button. To test web cam mode open AMCAP in your program files, it will be in folder called "SPCA1528" plug in USB and hit the power button on camera. You should then see a live video playing.



EKEN_V0.0.03.EXE:

A Set Time program that automatically synchronizes your camera's time/date using the date/time from your pc. This didn't work for me but I included it anyways incase someone wants to try it. I was told it works if you run it as "Administrator" To run as Administrator right click the EKEN_V0.03.EXE and select "Run as Administrator"

TAG.TXT:

Manually Set Time by making a text file called TAG.TXT.

Copy the included TAG.TXT file to your desktop. Change the numbers in date and time to actual date and time.

Note:
[date] <---there must be a space after [date] .
 2010/01/01 <---there must be a space after full date .
 12:00:00 <---there is no space after the time .
 

 When finished save the file then put the tag.txt file on the card NEXT to the DCIM folder (not in DCIM folder) and turn on the cam.
After the cam sees the file it will delete it from card and time/date will change.