720P or 1080P HD Keychain Camera - HT99A Button Camera
Short press starts recording, green led blinks 3 times then off (camera is now recording)
Long press turns camera off at any time.
Short press starts or pauses video recording
Long press starts Wifi Mode (blue led)
WiFi name: MSL_Retailxxxx
WiFi Password: 1234567890
When connecting the camera using the USB cable
for the first time a box will pop up
"installing drivers" which are the USB mass storage device and video
camera USB device. A new drive will be listed on your pc, as example:
Removable Disk (J;)
To enter camera drive, plug in USB and short press the power button.
|Pictures and Videos|
Videos: 720P or
Pictures: 1280x960 .JPG
60 minutes of video recording = 8Gigs, records 3 minute clips each about 414MB.
All media files will be saved to the "VIDEO/JPG folder on the camera drive. Right click any of the media files you created in the folder for options like Cut, Copy, Paste, Delete. What I do is highlight all media (or edit, select all), cut and paste them to a folder on my pc, this removes them off camera SD card and saves them to pc.
USB takes about
3 hours 30 minutes to fully charge if the battery is completely empty.
When charging the (red light) will remain solid, when fully charged the light will shut off.
This cam can do up to 60 minutes of video on full charge.
Note: There are 2
cables for this camera.
|Movie Maker 6 for Win 7|
|Windows live movie maker that shipped with windows 7 is more of a down graded movie maker 6. For those who want the better movie maker 6 for win7 -64 bit edition you can download it here, download also includes K-lite codec pack 64 bit. See how to: video|
SD cards range from 2-32 GB. The cards used are the Micro SD/TF/SDHC with storage space 4GB/8GB/16GB/32GB. Tip: TF = TransFlash, SDHC = Secure Digital High Capacity. Your local computer store may sell these cards but you will probably find them cheaper online. The higher the class number (2, 4, 6...) the faster the read/write speed. Transcend, Kinston, and SanDisk are popular brands. Class numbers will be circled, see pic below.
Class is the rate in
which data flows to and from the card.
the SD card the brass pins on card will face towards lez of camera.
|Basic Settings and How They Work here|
|Original manual that comes with camera.|
Last firmware update
|Firmware Installation Software|
|Ez Firmware Updater|
|Inside the Hetai Button Camera 1080P|
|Take a closer look at the internal parts of the Hetai HT99A HD 1080P|
|Pros / Cons|
Pros: Sharp clear audio/video. Uses 5 pin micro USB 2.0, WiFi, battery uses a plug-in type connector for ez replacement.
Slow white balance response going from dark to light. Charging time long.
This is what the time stamp looks like on the Hetai Button Cam 1080P HD.
© 2005-2018 2KOOL4U.com