Ebay Stores

Note:
D001 has blue/red leds with push buttons. (shown above)
MD80 has blue/green leds with slider buttons.
MD80 vs D001

Basic Operation:

There are 3 buttons, press and hold power button for 3 seconds to turn camera On or Off.
The Mode Button selects between sound activated recording and continuous recording.
The Stop/Start Button starts or stops a recording.
In standby mode the camera will shut off automatically after 35 seconds of non use.

Mode Button:

Press power button to start camera, a constant blue led will appear. Press the Mode button once to put camera into sound activation mode, red led will fast flash. When a sound activates recording the red led will slow flash. Note: In sound activation mode the camera will continuously record as long as sound is present, when sound is no long present the camera will record an extra 2 minutes then go back to sound standby mode waiting for another sound. To switch back to continuous recording press the mode button again (solid blue led)

Start/Stop Button:

Press power button to start camera, a constant blue led will appear. Press the start/stop button for continuous video recording, red led will slow flash during recording.
Push the start/stop button again to stop recording.

PIP Using Movie Maker 6
Make a picture in picture video using RehanFX transitions and effects for Vista movie maker.
See example video: RehanFx PIP

SD cards range from 2-32 GB. The cards used are the Micro SD/TF/SDHC with storage space 4GB/8GB/16GB/32GB. Tip: TF = TransFlash, SDHC = Secure Digital High Capacity. Your local computer store may sell these cards but you will probably find them cheaper online. The higher the class number (2, 4, 6...) the faster the read/write speed. Transcend, Kinston, and SanDisk are popular brands. 4GB class 4 or higher recommended. Class numbers will be circled, see pic below.

Class is the rate in which data flows to and from the card.
Example:
Class 2 = 2MB/second
Class 8 = 8MB/second
Class 10 = 10MB/second
This is the minimum data transfer for each card.

When inserting the SD card the brass pins on card will face towards back of camera.

To remove or insert SD card push card IN until you hear a "click" sound.

Windows software to set time and date automatically using USB
Works with most all mini cams that use a text file.

2K_Ez_Configuration

To set time and date manually you need to make a text file called Tag.txt
Open notepad and type this in as shown:

[date] Space/Enter
2010/01/01 Add your date then Space/Enter
12:06:20 Add your time

Save the notepad file as Tag.txt

There are a few ways to add this file to the camera.

Using a SD card reader or SD adapter place the Tag.txt file onto the SD card next to the DCIM folder, then plug SD card back into camera and the next time you power up camera it should be set.

Using USB place the Tag.txt file next to the camera folder named DCIM (this is the root of camera)

Using USB place the Tag.txt file onto the drive letter of your camera by going to start/computer/camera drive /then drag and drop or copy and paste the file onto the drive letter.

Unplug the camera and power it off. Next time you turn it on the file will be accepted and the time and date will change. If you cant figure it out heres the TAG.txt  I made, just change the numbers to your date and time. Once the Tag.txt has been accepted the camera will delete it.

Removing the Time and Date:

As of now there are only a few ways to remove time and date, use Logoaway, Virtual Dub, Crop video, Add a title or layer over the time and date or stretch the video. To be honest none of these methods are that good, you may just want to leave it and save yourself the headaches of trying removing it.