2K CUSTOM STRYKER F-27

Stryker Basics

2K Custom Parts
Stryker Models
Flight Simulator
Center of Gravity
Adjusting /  Elevons
Painting / Sanding
Paint Designs
Glue Types
Repairs
Motor Mount
Adding CF Rods
Tape Hinges
Ubec
ABC Fuses
Prop Basics
AmpsWattsVolts
WaveosScope
Online Calculators
Video
 

2K Fun Stryker Build

2K Stryker: Stryker C fuse custom painted. Fake side vents removed, Gutted inside bay for more space, 2 Carbon fiber rods tip to tip, replaced leading edge FG tubes with 2 CF rods, Glassed fuse, 2" tapered balsa elevons w/6 Dubro hinges and balsa trailing edge. Comes with vertical fins, Custom aluminum motor mount (shown below), Custom made 1 piece hatch, (2) 2-56 all threaded push rods w/(4) 2-56 Metal clevises, Dubro 237 control horns. Coffee straws glassed into antenna channel for ez install/removal of 72mhz Rx antenna wire. Total weight 12.3oz.

Electronics not included.

OUT OF STOCK
 

2K Custom Aluminum Motor Mounts:

Custom made .064 Aluminum mount. Fits 28mm motors. 4"x 2-1/2" Bolt pattern 19x16
 

OUT OF STOCK
 

2K Custom One Piece Hatch:

One piece custom hatch .020 impact resistant plastic w/fake vent and short vertical fin. Vent can be made real if cut out. Same shape and dimensions as the original 3 piece hatch at about half the weight 17g. They are shipped (clear)

OUT OF STOCK

2K Custom Balsa Elevons

Tapered trailing edge with V shape leading edge angle cut for stryker. 1/4" x  1-3/4"
 

OUT OF STOCK
 

For more info email Webmaster